Best Selling

Boiler-Safety Draining Valve (70141-02).

Designed for both indoor and outdoor environments Incorporates numerous holes in the design, providing a unique aesthetic while allowing rainwater to flow through Chairs can be stacked up to eight chairs high Incredibly light, making them easy to move and store Easy to clean and maintain Strong and robust plastic construction Five-year structural warranty

Bostik 2402 Hypalon Two Part Glue 250ml, 1 litre, 5 litre 25 litre

5 litre Bostik NE486 + hardener, Translucent

Bostik Mrocol PU 2D480 solvent free thixotropic 2-component polyurethane construction adhesive : 7 kg Marocol PU 2D480, Beige Marocol PU 2D480 is developed for structural bonding of (artificial) teak to deck. Due to its long open time, it is very suitable to bond large surfaces in one time. Solvent free. Long open time of 120 minutes. Easy and fast application. High gap filling. . . . . ....

5 litre Bostik 2402 + Hardener, Transparent

Simson Finishing Soap is a mixture of special tensides. This product is ideal for finishing and tooling sealant joints. Any danger of yellowing/discolouration of sealant joints, that may occur while using standard soap suds is not possible with Simson Finishing Soap because of the absence of colouring- and preserving agents. (NB tensides are water soluble substances that influence the surface tension...

Simson MSR construction adhesive SSKF is a 1-component, permanently elastic, fast curing construction adhesive, based on Silyl Modified Polymer (SMP). It is the longer open time version of the MSR Construction Adhesive. This product has been developed for bonding and sealing applications in the yacht and boat building industry. MSR Construction Adhesive SSKF has been tested and certified to the International...

Simson MSR Fast Tack is a permanently elastic, 1-component adhesive based on Silyl Modified Polymer (SMP) with a high green strength, an excellent UV stability and fresh and salt water resistance. MSR Fast Tack has been tested and certified to the International Maritime Organisation fire test procedures for surface flammability, resolution A.653 (16) and has been approved for use in wall, ceiling and...

Simson STR 140 is a 1-component, moisture curing polyurethane adhesive. It is highly elastic, has a good slump resistance and cures at low humidity and vacuum pressing. STR 140 is a bedding compound between steel, aluminium, polyester and/or wooden (pre-fab) decks and teak strokes. Also suitable for bonding watertight plywood subdeck on a steel, aluminium, polyester or wooden sundeck Very good ageing...

Bostik Vinycol 1520 M2 + Hardener is an adhesive that is specifically designed for the bonding of synthetic materials. Due to its resistance against plasticizer, Vinycol 1520 + M2 Hardener is suitable for bonding flexible PVC. Suitable for bonding coated (soft) PVC or polyurethane materials (inflatable boats, strip conveyor, etc.). Suitable for bonding Neoprene/Hypalon materials and possible repairs....

Brass Drain Complete?

A female stud compression coupling in brass, supplied with compression olive and nut. The compression union has a 1/2' BSP female thread one end and a 15mm compression fitting the other end.

A straight compression coupling made from brass with a 3/8' compression on one end and a 15mm compression the other end. This coupling is supplied with compression nuts and olives.

Bravo Turbo Max inc Console Kit 24V consists of: Turbo Max Air Station Console Mount Inflator 24V inc DC Driver It is a large capacity 24V inflator which can inflate a 7M Rib in approx 7 minutes and has a capacity of 1000L/min max pressure is 3.6psi. Pressure can be regulated up to 3.6psi with automatic shut off, equipped with two powerful motors mounted on an aluminium plate to disperse heat. Screws Bracket Inflation Adaptors Power Cable 0.5M long with a 100 Amp Connector Hose is not included, so Turbo Max Console Kit Hose Fittings is required part nos 502244 ( this come with all connectors 2.8M hose), if just a longer length of hose is required order part nos 502236 which is sold by the metre, also available waterproof deck mounted hatch locker with clear hatch part nos 502242 ( so inflator can be installed inside to protect from spray dirt) Click on related products below to view Hose Fittings, Hose, Watertight Box,Inflate Aadaptors( will require hose to be cut to fit hose reducer)

Brevette plastic Rooflight stays for all perspex roof lights (per pair)

An essential piece of kit for European motoring. 10 piece kit contains most bulbs and fuses commonly used on cars, caravans and motorhomes, including, H1, H4 and H7 bulbs. This kit is also E approved.

Ideal for supplying barbecues, cooking appliances, patio heaters and other appliances for LPG (propane and butane) from the motorhome's existing supply. It comes complete with a plug in tail connector for connecting on to the hose from the appliance. Inserting the gas fitting and turning, locks it in place and allows the gas to flow. PLEASE NOTE: Gas appliances should only be installed by a Gas Safe...

Plug in tail connector - spare part for gas point. 32466 and 32467.

Ideal for ski, jet ski, canoe kayak & sailing Designed as the ultimate high performance jacket Compact design, ideally suited for dinghy sailors, sport canoeists and windsurfers It features high-density soft PVC foam buoyancy, double sided velcro waist straps, side entry zip, a mesh front pocket and SOLAS Retroreflective Tapes (70180). The unique double velcro waist strap makes it fully...

C-450mm butane pigtail S/T x W20 nut.

Butterfly pole clamps, 21-23mm, 2 per pack. Pack of 10.

C7 & D7 Repair KitAvon part nos V01937