Repair Kits & Adhesives

A7/B7 Repair KitAvon part nos V00001

The instant repair for all makes of Rib's, inflatables and liferafts. The patented 'ClamSeal' is a compact safety device, which can be quickly inserted into any tear in a tube or fabric floor up to 90mm [3.5 inches]. Hand tighten the nut is all that is needed before reinflating the tube for an instant repair above or below the waterline. Giving you ample time before a permanent repair can be carried...

Bostik M501 Solvent 5 ltr

C7 & D7 Repair KitAvon part nos V01937

Gommuguard Thinners 375m

Hypalon Curing Agent 10ml, 25ml, 50ml, 250ml or 1 litre

Hypalon Professional Repair Kit

Hypalon Toluene Free Solvent Hypalon Toluene Free Solvent is suitable for preparing Hypalon fabric and cleaning off excess Hypalon adhesive Available in four sizes, 250ml, 500ml, 1 Litre and 5 Litre

PVC Two Part Glue 250mm, 500mm, 1 Litre, 5 Litre 25 Litre

MEK Solvent 250ml, 500ml, 1 litre 5 litre

Motorguide R3 40 HT 40 lbs 12 Volt 7 Speed Electric Outboard with a 36-inch shaft. These electric outboards never need to be serviced, weight very little and can be used with a normal Numax Gel or leisure battery. 17 lb of thrust is the equivalent of 1 horsepower. Motorguide electric outboards can be used as an auxiliary to the main engine or for a tender as the main engine. 40 lb of thrust is approximately 2.5hp. They have a very wide clamp and can be locked on using an OML 195 outboard lock if needed. It only weighs 7kg and so is very portable.

An easy to use boat cleaner specifically formulated for use on inflatable boats. Suitable for both PVC and Hypalon. Removes dirt, white oxidation, grease, oil and petrol deposits. Biodegradable. 500ml spray trigger bottle.

Non-stocked - 5 week average lead time

Single part 70ml tube Hypalon adhesive Will bond natural rubber, polychloroprene, butyl, nitrile, hypalon and polyurathene rubber materials, rigid PVC, wood, leather and metal (metal should be primed with 2799 primer). Not for use on plasticised PVC Excellent resistance to heat, salt water and humidity.

PVC Adhesive 2 part 1L Tin & 40ml curing agent. Solvent based polyurathene giving excellent adhesion to both plasticised and unplasticised PVC. Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurathene fabric and foam. Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant...

Repair kit for emergency repairs, which is supplied in hard waterproof container with tamper proof lid. A handy item to keep on board for repairs to PVC inflatble boats. Contains 70ml tube of PVC adhesive, 35 x 15cm of PVC material and instructions. PLEASE NOTE:- For a Permanent Repair, Polymarine 2 part Adhesive must be used. Available in Grey, White, Black or Orange

Flexible water based acrylic latex sealant used internally for sealing porosity and minor leaks in Hypalon, PVC inflatables and similar fabrics. Simple and effective to use. Inflate the tube or tubes to be repaired and then remove valve system allowing the tubes to deflate, pour in the Sealflex liquid, reinflate the tubes and allow it to coat the inside of the tubes by lifting and rotating the boat...

Professional permanent Repair Kit for all makes of Polyurethane Inflatable Dinghies & Rigid Inflatable Boats Everything you need in one watertight container to do a permanent repair, available in the following colours: Grey or Orange Watertight Container 250ml 2 part Hypalon Adhesive 125ml solvent Ethyl Acetate 37 x 15cm material Mixing Stick Mixing cup Application Brush Gloves Abrasive...

PVC Emergency Repair Kit

PVC Single Part Toluene Free Glue 70ml IBS PVC Single Part Toluene Free Adhesive has good resistance to fuel and water and is particularly suitable for bonding PVC and Polychloroprene coated fabrics For emergency repairs, as supplied in Emergency Repair Kit, for permanent repair use Two Pack Glue. Click download icon for Instructions, Safety Data Sheet Boat Fabric Type information Click accessories icon for solvents etc

Lightweight and compact, the kicker lends itself perfectly as a short range propulsion system for a tender that will get you to and from the shore with no fuss and no noise. A fully enclosed propeller is powered by a 1000W brushless motor coupled to an integral 259 Wh Lithium battery. At only 4.7kg the kicker is light enough to pass up from a tender to a yacht single-handedly. Weight : 4.7 kg Brushless...

Product description For model Travel 503/1003 Ø 292 mm Additional information in the Propeller Guide Item number: 1917-00 | EAN: 4260113692523 Equipment included: Propeller Warranty: 2 years for non-commercial use

Zodiac Z7096 750ml PVC Two Part Adhesive Zodiac Two Part Glue is suitable for all PVC Inflatables Ribs Supplied with 3 x bottles of Curing Agent Zodiac Part nos: Z7096 For larger quantities see Bostik Vinycol 1520 ( 10 Litres) Bostik Demodur RC (800 grammes) part nos 502131 This is the same glue hardener as Zodiac Z7096