Grid
List
C7 & D7 Repair Kit
C7 & D7 Repair KitAvon part nos V01937
FiberFix Flex Patch
FiberFix Flex is an impregnated, rubberised fibreglass patch for permanent repairs on both flat and hard-to-wrap-around surfaces. Simply apply the patch over the hole and expose to sunlight or UV light.
Flex patch will cure in 3-5 minutes.
Three patches 3"x 3", 2"x 8" & 5"x 5"
Properties
Watertight & airtight
Fits to any shape
Sticks to almost...
Glass Fibre Repair Kits Small, Medium & Large
Glass Fibre Repair Kits available in three sizes: Small, Medium Large
Gommuguard Thinners 375ml
Gommuguard Thinners 375m
Halkey Roberts Inflatable Boat/Kayak/SUP Replacement Valve
Halkey Roberts replacement valve suitable for all inflatable boats, kayaks and SUP's with this particular valve system.
Supplied as a 3 part system, inside, outside and valve cap.
Threaded assembly for easy installation
Sprung loaded centre valve pin for easy deflation
Following markings on the main body of the valve: HRC PAT. NO. 4.478.587 & 690NSBV
Hypalon Curing Agent
Hypalon Curing Agent 10ml, 25ml, 50ml, 250ml or 1 litre
Hypalon Emergency Repair Kit
Hypalon Emergency Repair Kit
Hypalon Professional Repair Kit
Hypalon Professional Repair Kit
Hypalon Single Part Toluene Free Glue 70ml
Hypalon Single Part Toluene Free Glue 70ml
Hypalon Toluene Free Solvent
Hypalon Toluene Free Solvent
Hypalon Toluene Free Solvent is suitable for preparing Hypalon fabric and cleaning off excess Hypalon adhesive
Available in four sizes, 250ml, 500ml, 1 Litre and 5 Litre
IBS Hypalon Two Part Adhesive/Glue
Hypalon Two Part Glue 250ml, 500ml, 1 litre, 5 litre 25 litre
IBS PVC Two Part Adhesive/Glue
PVC Two Part Glue 250mm, 500mm, 1 Litre, 5 Litre 25 Litre
Kayak Sit On Kayak Scupper Stoppers
Fit these plugs into your kayak scupper holes to prevent water from entering the kayak cockpit. Easy to remove if necessary using the attached pull cord.
Size: Small 1.25" - 1.5"
Colour: Yellow
Supplied as a pair with retaining cord
MEK Solvent for PVC Fabric
MEK Solvent 250ml, 500ml, 1 litre 5 litre
Polymarine Hypalon Emergency Boat Repair Kit
Repair kit for emergency repairs, which is supplied in hard waterproof container with tamper proof lid. A handy item to keep on board for repairs to Hypalon inflatble boats.
Contains
70ml tube of Hypalon adhesive,
35 x 15cm of Hypalon material,
abrasive paper and instructions.
Available in Grey, White, Orange or Black
PLEASE NOTE:- For a permanant repair 2 part adhesive must be used.
Polymarine Inflatable Boat Cleaner
An easy to use boat cleaner specifically formulated for use on inflatable boats.
Suitable for both PVC and Hypalon.
Removes dirt, white oxidation, grease, oil and petrol deposits.
Biodegradable.
500ml spray trigger bottle.
Polymarine 2903 PVC/Hypalon – Primer and Cleaner
Polymarine 2903 Inflatable Boat Solvent Primer & Cleaner
For Priming and Cleaning both PVC and Hypalon Inflatable Boat Fabrics.
A primer to degrease and prepare surfaces before adhering
Use sparingly with a soft cloth, evaporates quickly
Suitable for reactivating applied adhesive
Contains Butanone (MEK)
Suitable for cleaning brushes
500ml can size
Polymarine GRP Silicon Free Polish 250ml
Inflatable Boat GRP Polish
Wipe on Polish and wipe off.
Gently buffs and polishes to a brilliant shine without scratching.
Totally safe on all marine materials.
Supplied in 250ml flip top bottle
Polymarine Hypalon Inflatable Boat Adhesive 2-Part
Hypalon Adhesive 2 part 250ml tin with 10ml curing agent.
Solvent based polyurethene giving excellent adhesion to both plasticised and unplasticised PVC.
Will bond a variety of surfaces including wood, canvas, leather, nylon fabric, polyurethene fabric and foam.
Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex".
Used by liferaft...
Polymarine Hypalon Inflatable Boat Adhesive Single Part
Single part 70ml tube Hypalon adhesive
Will bond natural rubber, polychloroprene, butyl, nitrile, hypalon and polyurathene rubber materials, rigid PVC, wood, leather and metal (metal should be primed with 2799 primer).
Not for use on plasticised PVC
Excellent resistance to heat, salt water and humidity.
Polymarine Inflatable Boat Finish 250ML
Polymarine Inflatable Boat Finish
A finishing Product specifically for use on inflatable boats.
Suitable for both PVC and Hypalon fabrics.
Easy to apply with a soft cloth, no polishing required.
Dries to a pleasant sheen.
Helps to prevent resoiling.
Contains no sillicones or distillants.
Prevents fading and brightens colours.
Polymarine PVC (3026) 2 Part Adhesive - 1L Tin & 40ml cure
PVC Adhesive 2 part 1L Tin & 40ml curing agent.
Solvent based polyurathene giving excellent adhesion to both plasticised and unplasticised PVC.
Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurathene fabric and foam.
Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant...
Polymarine PVC (3026) Inflatable Boat Adhesive 2-Part 250ml
PVC Adhesive 2 part 250ml tin with 10ml curing agent.
Solvent based polyurathene giving excellent adhesion to both plasticised and unplasticised PVC.
Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurathene fabric and foam.
Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex".
Used by liferaft...
Polymarine PVC Emergency Boat Repair Kit
Repair kit for emergency repairs, which is supplied in hard waterproof container with tamper proof lid. A handy item to keep on board for repairs to PVC inflatble boats.
Contains
70ml tube of PVC adhesive,
35 x 15cm of PVC material and instructions.
PLEASE NOTE:- For a Permanent Repair, Polymarine 2 part Adhesive must be used.
Available in Grey, White, Black or Orange
Polymarine PVC Inflatable Boat Adhesive Single Part
Single part 70ml tube PVC Adhesive Solvent based polyurethene giving excellent adhesion to both plasticised and unplasticised PVC.
Will bond a variety of surfaces including wood, canvas, leather, PVC, nylon fabric, polyurethane fabric and foam.
Use for repair of all inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex".
Used by liferaft service stations...
Polymarine Sealflex 500ml
Flexible water based acrylic latex sealant used internally for sealing porosity and minor leaks in Hypalon, PVC inflatables and similar fabrics.
Simple and effective to use. Inflate the tube or tubes to be repaired and then remove valve system allowing the tubes to deflate, pour in the Sealflex liquid, reinflate the tubes and allow it to coat the inside of the tubes by lifting and rotating the boat...
Polymarine Sureseal 12gm Tube
Flexible repair sealant and adhesive for a waterproof permanant repair to coated fabrics, PVC, PU, neoprene, rubber, leather, most plastics and fabrics.
Multiple uses including repairs to inflatable boat and RIB tubes, wet suits, dry suits, waders, boat fenders, tents and awnings, sails, diving and skiing equipment, foul weather gear, flotation vests, footwear, vinyl upholstery and thousands more items.
Creates...
Polyurethane Emergency Repair Kit
Polyurethane Emergency Repair Kit
Available in Grey or Orange
Polyurethane Professional Repair Kit - Orange
Professional permanent Repair Kit for all makes of Polyurethane Inflatable Dinghies & Rigid Inflatable Boats Everything you need in one watertight container to do a permanent repair, available in the following colours: Grey or Orange
Watertight Container
250ml 2 part Hypalon Adhesive
125ml solvent Ethyl Acetate
37 x 15cm material
Mixing Stick
Mixing cup
Application Brush
Gloves
Abrasive...
PVC Curing Agent
PVC Curing Agent 10ml, 25ml, 50ml 250ml 1 litre
PVC Emergency Repair Kit
PVC Emergency Repair Kit
PVC Professional Repair Kit
PVC Professional Repair Kit
PVC Single Part Toluene Free Glue 70ml
PVC Single Part Toluene Free Glue 70ml
IBS PVC Single Part Toluene Free Adhesive has good resistance to fuel and water and is particularly suitable for bonding PVC and Polychloroprene coated fabrics
For emergency repairs, as supplied in Emergency Repair Kit, for permanent repair use Two Pack Glue.
Click download icon for Instructions, Safety Data Sheet Boat Fabric Type information
Click accessories icon for solvents etc
Seam Grip Repair Kit 1oz
Seam Grip Repair Kit 1oz
Toluene Solvent for Hypalon Fabric
Toluene Solvent for Hypalon 250ml, 500ml, 1 litre 5 litre
Zodiac Single Part PVC Glue 24ml (Z7020)
Zodiac Single Part PVC Glue 24ml (Z7020)
Suitable for the repair of all PVC Inflatables Ribs
Zodiac Z7096 750ml PVC Two Part Adhesive/Glue
Zodiac Z7096 750ml PVC Two Part Adhesive
Zodiac Two Part Glue is suitable for all PVC Inflatables Ribs
Supplied with 3 x bottles of Curing Agent
Zodiac Part nos: Z7096
For larger quantities see Bostik Vinycol 1520 ( 10 Litres) Bostik Demodur RC (800 grammes) part nos 502131
This is the same glue hardener as Zodiac Z7096
Zodiac Z7098 750ml Hypalon Two Part Adhesive/Glue
Zodiac Z7098 750ml Hypalon Two Part Adhesive
Zodiac Two Part Glue is suitable for all Hypalon Inflatables Ribs
Supplied with 3 x bottles of Curing Agent
Zodiac part nos Z7098
See related products below for Solvents etc
Bravo 8 Foot Pump
Bravo 8 Foot Pump
A robust 6.5 litre foot pump suitable for small beach boats, kayaks, SUP's and air beds.Reinforced fabric coated bellows & all stainless steel metal parts.
Large capacity 6.5 litres
All stainless steel parts
Max pressure 300mbar 4.4psi
32cm x 23cm x 7cm high
Supplied with crush resistant hose and universal adaptors
Dinghy Launching Wheels
Inexpensive dinghy launching wheels can be easily attached to the transom of your tender so you will easily be able to wheel your tender anywhere over hard sand and paved surfaces. You will no longer risk damaging your tender by dragging it, or struggle to carry it!
The wheels are made from lightweight, robust ABS plastic which is resistant to outdoor elements, they will not rust, corrode or deteriorate...
Inflation Bayonet Adaptor For Dinghy Valves
Bayonet adaptor for inflatable boat and kayak valves.
This HP valve adaptor will fit most makes of inflatable dinghies Seago, Waveline, Plastimo, Wetline.
Insta-Lok Snap Davit Kit - Grey
Providing a safer option for entering or exciting an inflatable tender as well as practical storage, the Polymarine Insta-lock Snap Davit kit comprises of 2 spring loaded davit heads which secure to the Swim Platform and 2 Pads with lock-on-bars which are glued onto the Inflatable. When aligned the sprung loaded davit heads snap onto the lock-on-bar. The dinghy is firmly locked to the Host Craft ready...
Jabsco Rule iD20 Hi-Speed Dinghy Inflator/Deflator 12V
Jabsco Rule's High Speed Inflator / Deflator
ID20 is a 12V portable pump with multiple valve options and a high power motor (300W) that provides quick inflation and deflation for large inflatables.
The Rule High Speed Inflator/Deflator can inflate a typical 4-man dinghy in under 2 minutes (or a 10 ft x 6 ft x 22" family inflatable pool).
Adjustable nozzles are included for most inflatables...
Seago Dinghy Wheels Transom Quick Release Bracket
Dinghy Dolly Wheel Brackets
The best way to attach your dolly wheels to your boat.
The easy to fit bracket attaches to the transom and remains in place.
The dolly wheels simply slide into the bracket locking in place.
The Wheels can be removed anytime quickly by pressing the release button and sliding the wheels off.
Sold as a pair
Hi Visibility Propeller Bag
Hi Visibility Propeller Bags
A real must have if you are towing and the outboard engine or outdrive is exposed.
Made of bright nylon with a draw string cord.
Towing without a prop bag warrants points on your licence
Sizes: ("W" = width across drawcord)
Small: W40cm x L40cm
Medium: W50cm x L50cm
Large: W63cm x L63cm
XX Large: W77.5 cm x L92.5
August Race August Race Care Pack
August Race Handover Packs are the perfect way to complete a new boat handover or to welcome a new berth holder.
Each pack contains 3 introduction-sized bottles, 1 high-quality microfibre cloth and a moisture resistant durable bag.
Available to purchase as individual packs and customer-branded.
August Race Race Liquid RIB
Grab a bottle of our RIB cleaner to breathe new life back into your tubes or just to show your RIB the attention it deserves! Used internationally by some of the worlds leading RIB manufacturers. August Race Liquid RIB is capable of cleaning both Hypalon and PVC tubes and can truly bring your RIB back to life. As used by Cobra RIBs, RIBeye Boats, RIBcraft, RIB X, RIBquest, Brig UK, Ballistic RIBs and...