Grid
List
Guidi Vlvmanifold F 3/4Inx1/2Inx3
Vlvmanifold F 3/4Inx1/2Inx3
Guidi Vlvmanifold F 3/4Inx1/2Inx4
Vlvmanifold F 3/4Inx1/2Inx4
Guidi Water Strainer Bronze Medi Poly 1 1/2
Water Strainer Bronze Medi Poly 1 1/2
Guidi Water Strainer Bronze Medi Poly 1 1/4
Water Strainer Bronze Medi Poly 1 1/4
Guidi Water Strainer Bronze Medi Poly 1/2In
Water Strainer Bronze Medi Poly 1/2In
Guidi Water Strainer Bronze Medi Poly 1In
Water Strainer Bronze Medi Poly 1In
Guidi Water Strainer Bronze Medi Poly 2In
Water Strainer Bronze Medi Poly 2In
Guidi Water Strainer Bronze Medi Poly 3/4In
Water Strainer Bronze Medi Poly 3/4In
Guidi Water Strainer Bronze Medi Poly 3/8In
Water Strainer Bronze Medi Poly 3/8In
Nickel Plated Brass Lever Handle Ball Valve 1' BSP
Brass Ball Valve 1" BSP
A versatile and competetively priced good quality Italian made full flow ball valve suitable for marine seacock installations, industrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene, petrol & diesel.
Minimum 100,000 operation design
90 degree movement by either lever or tee handle
Ideal for hot & cold water, different oils &...
Nickel Plated Brass Lever Handle Ball Valve 1-1/2' BSP
Brass Ball Valve 1-1/2" BSP
A versatile and competetively priced good quality Italian made full flow ball valve suitable for marine seacock installations, industrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene, petrol & diesel.
Minimum 100,000 operation design
90 degree movement by either lever or tee handle
Ideal for hot & cold water, different oils...
Nickel Plated Brass Lever Handle Ball Valve 1-1/4' BSP
Brass Ball Valve 1-1/4" BSP
A versatile and competetively priced good quality Italian made full flow ball valve suitable for marine seacock installations, industrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene, petrol & diesel.
Minimum 100,000 operation design
90 degree movement by either lever or tee handle
Ideal for hot & cold water, different oils...
Nickel Plated Brass Lever Handle Ball Valve 1/2' BSP
Brass Ball Valve 1/2" BSP
A versatile and competetively priced good quality Italian made full flow ball valve suitable for marine seacock installations, industrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene, petrol & diesel.
Minimum 100,000 operation design
90 degree movement by either lever or tee handle
Ideal for hot & cold water, different oils &...
Nickel Plated Brass Lever Handle Ball Valve 2' BSP
Brass Ball Valve 2" BSP
A versatile and competetively priced good quality Italian made full flow ball valve suitable for marine seacock installations, industrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene, petrol & diesel.
Minimum 100,000 operation design
90 degree movement by either lever or tee handle
Ideal for hot & cold water, different oils &...
Nickel Plated Brass Lever Handle Ball Valve 3/4' BSP
Brass Ball Valve 3/4" BSP
A versatile and competetively priced good quality Italian made full flow ball valve suitable for marine seacock installations, industrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene, petrol & diesel.
Minimum 100,000 operation design
90 degree movement by either lever or tee handle
Ideal for hot & cold water, different oils &...
TruDesign Composite Ball Valve
TruDesign Ball Valves Composite Ball Valves
Fully approved and manufactured in New Zealand for use in marine applications above and below the water line.
The bodies of these valves are moulded in a glass reinforced nylon composite material providing high impact and tensile strength, resulting in a light weight unit, free from corrosion and electrolysis. The internal workings are moulded in a...
TruDesign Load Bearing Collar
These are designed for use with TruDesign Skin Fittings and Ball Valves. The Collar enables compliance to ABYC H-27 standard for the entire assembly.
Small for ½”, ¾” or 1″ sizes
Medium for 1¼” or 1½” sizes
Large for 2″ size
Features:
ABYC H-27 compliance for ¾”, 1”, 1¼”, 1½”,...
90° Plastic Skin Fitting with Stainless Steel Cap Hose
90º Skin Fittings moulded in fibre reinforced acetal with beautifully polished stainless steel cap that is ultrasonically welded onto the flange.
Light weight and highly corrosion resistant.
Threaded with back nut for securing
Attractive stainless steel cap
Barton Marine Drain Bung & Socket
This screw-type drain bung and sockets is among the best available.
Barton Marine Drain Bung Only
This screw-type drain bung and sockets is among the best available.
Cockpit Drain for 1 1/2' Hose
Cockpit Drain
Moulded in ICI Nylon 66 (Maranyl) material and made to the highest marine quality, they are unaffected by extreme temperatures, with a white finish and highly polished surfaces to match the hull.
A white nylon cockpit drain with grating and countersunk head supplied with flange nut, for flush fitting up to 40mm deck.
1-1/4" & 1-1/2” ID hose
Top O/A dia. 68mm
Overall...
Drain Socket with Captive Plug, Oval 60x30mm
Drain Socket with Captive Plug, Oval 60x30mm, White or black
Guidi Brass Grated Water Intake 2 in
Suitable for Fresh Water environements
Guidi Brass Slotted Round Scoop - D120 mm
Suitable for Fresh Water environements
Guidi Brass Thru-Hull Connection 2 in
Suitable for above waterline applications.
Guidi Bronze Thru-Hull
Premium quality Guidi thur-hull made from UNI 7013/8 . Engineered for maximum water flow and reduced cavitation with a sleek design. Guidi bronze contains less than 6% zinc and therefore is the most suitable alloy for below waterline and thru-hull use and unlike DZR brass is resistant to galvanic corrosion even without bonding.
Guidi Bronze Water Inlet in Manta in Series 2 in
Premium quality Guidi water intake made from UNI 7013/8 . Engineered for maximum water flow and reduced cavitation with a sleek design. Guidi bronze contains less than 6% zinc and therefore is the most suitable alloy for below waterline and thru-hull use and unlike DZR brass is resistant to galvanic corrosion even without bonding.
Plastic Skin Fitting Hose
Plastic Skin Fitting
Wide mushroom flange
Barbed Hose Tail
Plastic Skin Fitting with Stainless Steel Cap Straight Hose
Straight Skin Fittings moulded in fibre reinforced acetal with beautifully polished stainless steel cap that is ultrasonically welded onto the flange.
Light weight and highly corrosion resistant.
Threaded with back nut for securing
Attractive stainless steel cap
TruDesign Domed Skin Fitting Black
Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27 500Lb standard when used in conjunction with th Trudesign collar.
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength,...
TruDesign Domed Skin Fitting White
Suitable for underwater use, TruDesign range of Skin Fittings are certified by the International Marine Certification Institute (IMCI) and Bureau VERITAS to ISO 9093-2.
They also comply with ABYC H-27 500Lb standard when used in conjunction with th Trudesign collar.
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength,...
Albin Y-Valve Diverter Valve
Heavy duty Y-valve diverter for installation in waste discharge and bilge pump out systems.
Moulded manual lever handle, lockable to prevent accidental discharge
Corrosion resistant construction with moulded feet
Suitable for inland waterways use
Allows waste to be diverted to tank or pump out
38mm dia. outlets
1 x interchangable 25mm dia. for electric toilet toilet macerated waste
This...
C-Quip Non Return Valve 1', 1 1/4', 1 1/2' Sections
C-Quip Non Return Valve
Made from sturdy polypropylene, a built in rubber flap allows water to flow in one direction only.
Each section can be cut down to the size of the hose barb required.
1', 1-1/4', 1-1/2' sections.
258mm long
Forespar Plastic Diverter Valve 1-1/2'
Forespar Diverter ‘Y’ Valves and connectors are moulded from strong Marelon material.
This compact `Y’ Valve is an essential piece of equipment when the flow of water or other fluids are required to be conveniently diverted, as in marine head or bilge pump application where a holding tank is utilised.
They are easily mounted to a bulkhead
The valves are operated by a simple 120º...
Non Return Valve 1/2', 3/4', 1' Sections
In-Line Non Return Valve
Made from sturdy polypropylene, a built in rubber flap allows water to flow in one direction only.
Each section can be cut down to the size of the hose barb required.
1/2', 3/4', 1' sections.
O/A length 170mm
Plastic Bilge Strainer Strum Box
Features:
• For hoses with Ø18/20/24
• Horizontal Output
• Dimensions: 145 x 60 x 38 mm
• Rectangular Shape
• Black Colour
Whale DV5606 Diverter Valve 38mm
Diverter Valve
Diverter Valve Designed For Use In Bilge And Toilet Systems. Robust- reliable design.
Teflon lubricated non-stick operation. Precision machined for odour-proof seal.
Withstands sewage/black waste- saltwater and bilgewater.
Complies with U.S. Coast Guard rules for Type III waste systems.
Models available in either 25 mm (1') or 38 mm (1 1/2') hose connection
Typical Uses - Suitable for...
Whale DV5630 Diverter Valve 25mm
Diverter Valve
Diverter Valve Designed For Use In Bilge And Toilet Systems.Robust- reliable design.
Teflon lubricated non-stick operation.
Precision machined for odour-proof seal.
Withstands sewage/black waste- saltwater and bilgewater.
Complies with U.S. Coast Guard rules for Type III waste systems.
Models available in either 25 mm (1') or 38 mm (1 1/2') hose connection
Typical Uses - Suitable for...
Whale LV1215 In-line Non Return Valve 25mm / 38mm (1'/ 1 1/2')
Whale In-line Non Return Check Valve
Non-return valve that provides an easy way to maintain prime in a suction or discharge line
Designed to fit in-line
Suitable for use with manual or electric pumps
Materials: Body: Glass-filled Polypropylene, Valve: Nitrile
Pipe Diameter 25 mm (1') or 38 mm (1 1⁄2')
Whale LV1218 In-line Non Return Valve 25mm / 28mm (1'/ 1 1/8')
Whale In-line Non Return Check Valve
Non-return valve that provides an easy way to maintain prime in a suction or discharge line
Designed to fit in-line
Suitable for use with manual or electric pumps
Materials: Body: Glass-filled Polypropylene, Valve: Nitrile
Pipe Diameter 25 mm (1') or 28 mm (1 1⁄8')
Whale LV1219 In-line Non Return Valve 19mm (3/4') - 25mm (1')
Whale LV1219 In-line Non Return Check Valve
Non-return valve that provides an easy way to maintain prime in a suction or discharge line
Designed to fit in-line
Suitable for use with manual or electric pumps
Materials: Body: Glass-filled Polypropylene, Valve: Nitrile
Pipe Diameter 19 mm (3⁄4') - 25mm (1')
Whale SB3422 3/4' Multi Directional Strainer
Low profile strainer with a built in non-return valve ideal for use in bilge systems.
They prevent large debris for entering the hose which could damage pumps and include a non-return valve to prevent drain back.
For 3/4" / 19mm Pipe
Whale SB4222 Strainer Side Entry 25/38mm Hose
Whale SB4222 Strainer
Side entry strainer or strum box which stops debris entering the bilge pump suction hose.
The strum box is fitted with a non-return valve to prevent drainback of water in to the bilge.
Removable straining plate for easy cleaning.
Also available in top entry for deeper narrow bilges.
Suitable for 25 mm and 38 mm hose.
Whale SB5865 Strainer Top Entry 25/38mm Hose
Whale SB5865 Strainer
Top entry strainer or strum box which stops debris entering the bilge pump suction hose.
The strum box is fitted with a non-return valve to prevent drainback of water in to the bilge.
Removable straining plate for easy cleaning.
Also available in side entry for wider bilges.
Suitable for 1' - (25 mm) and 1-1/2' - (38 mm) hose.
Blye Python Stretch Water Hose 22.5m
Perfect versatible all-rounder hose.
Combines top resistance with clever expanding design, up to 3 times its original length with water on, depending on the pressure exerted.
Reinforced PVC Hose 12mm (1/2')
Non Toxic Food Grade Hose 12mm (1/2')
PVC hose reinforced with high tensile synthetic textile.
Non-toxic, abrasion, ozone and weather resistant.
Price per mtr - Supplied as a single length based on the number of meters ordered
Suction and Delivery Hose
Suction and Delivery Hose
Strong, flexible and smooth plasticized PVC, shock and crush resistant.
Light corrugated outside with shock resistant PVC spiral.
A semi transparent suction hose suitable for most pumping dutys.
19mm, 25mm, 32mm, 38mm, 50mm internal diameter
Price per mtr - Supplied as a single length based on the number of meters ordered
Suction and Delivery Hose 30mm (1-1/8')
Suction and Delivery Hose 30mm (1-1/8")
Strong, flexible and smooth plasticized PVC, shock and crush resistant.
Light corrugated outside with shock resistant PVC spiral.
A semi transparent Suction hose suitable for most pumping dutys.
30mm internal diameter
Price per mtr - Supplied as a single length based on the number of meters ordered
Suitable for Rule bilge pumps....
